静默安装oralce软件

来源：这里教程网时间：2026-03-03 15:49:07 作者：

本文分为以下几个步骤： 系统参数设置创建oracle用户及静默安装数据库软件 1.系统参数设置 检查系统参数 cat /etc/security/limits.conf oracle soft nproc 16384 oracle hard nproc 16384 oracle soft nofile 65536 oracle hard nofile 65536 oracle soft stack 1024000 oracle hard stack 1024000 cat /proc/sys/vm/max_map_count 200000 cat /etc/sysctl.conf kernel.sysrq = 1 vm.swappiness = 10 vm.dirty_background_ratio = 3 vm.dirty_ratio = 40 vm.dirty_expire_centisecs = 500 vm.dirty_writeback_centisecs = 100 fs.aio-max-nr = 1048576 fs.file-max = 6815744 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048586 vm.max_map_count = 200000 kernel.shmmni = 4096 kernel.sem = 250 32000 100 640 #kernel.shmmax = 1987485696 #kernel.shmall = 970452 vm.nr_hugepages = 16066 kernel.shmmax = 33693523968 kernel.shmall = 16451916 net.ipv4.ipfrag_high_thresh = 20971520 net.ipv4.ipfrag_low_thresh = 18874368 net.ipv4.ipfrag_time = 2 参数/etc/sysctl.conf fs.aio-max-nr = 1048576 fs.file-max = 6815744 kernel.shmall = physical RAM size / pagesize For most systems, this will be the value 2097152.（共享内存页数，共享内存页大小为4kb） kernel.shmmax = 1/2 of physical RAM. This would be the value 2147483648 for a system with 4GB of physical RAM.（单个共享内存段的最大值） kernel.shmmni = 4096（共享内存段最大数量） kernel.sem = 250 32000 100 128 net.ipv4.ip_local_port_range = 9000 65500 net.core.rmem_default = 262144 net.core.rmem_max = 4194304 net.core.wmem_default = 262144 net.core.wmem_max = 1048586 2.创建oracle用户及静默安装oracle软件 创建用户/usr/sbin/groupadd -g 501 oinstall/usr/sbin/groupadd -g 502 dba/usr/sbin/groupadd -g 503 oper/usr/sbin/groupadd -g 504 asmadmin/usr/sbin/groupadd -g 505 asmdba/usr/sbin/groupadd -g 506 asmoper/usr/sbin/useradd -u 501 -g oinstall -G asmadmin,asmdba,asmoper,oper,dba grid （搭建单实例无需创建grid用户，我写grid只是想解释一下为什么我oracle是502而不是501）/usr/sbin/useradd -u 502 -g oinstall -G dba,asmdba,oper oracle 创建目录mkdir -p /u01/ oracle/oracle/software chown -R oralce:oinstall /u01chmod -R 755 /u01/ 解压软件 cd /u01/oracle/softwareunzip p13390677_112040_Linux-x86-64_1of7.zipunzip p13390677_112040_Linux-x86-64_2of7.zipunzip p6880880_112000_Linux-x86-64.zipunzip p19692824_112040_Linux-x86-64.zipunzip <补丁版本> 编辑静默安装数据库软件脚本（无需修改，全部复制粘贴就行）cd /u01/oracle/software/databasevi db_install_11g.rsp #################################################################### ## Copyright(c) Oracle Corporation 1998, 2013. All rights reserved.## ## ## ## Specify values for the variables listed below to customize ## ## your installation. ## ## ## ## Each variable is associated with a comment. The comment ## ## can help to populate the variables with the appropriate ## ## values. ## ## ## ## IMPORTANT NOTE: This file contains plain text passwords and ## ## should be secured to have read permission only by oracle user ## ## or db administrator who owns this installation. ## ## ## #################################################################### #------------------------------------------------------------------------------- # Do not change the following system generated value. #------------------------------------------------------------------------------- oracle.install.responseFileVersion=/oracle/install/rspfmt_dbinstall_response_schema_v11_2_0 #------------------------------------------------------------------------------- # Specify the installation option. # It can be one of the following: # - INSTALL_DB_SWONLY # - INSTALL_DB_AND_CONFIG # - UPGRADE_DB #------------------------------------------------------------------------------- oracle.install.option=INSTALL_DB_SWONLY #------------------------------------------------------------------------------- # Specify the hostname of the system as set during the install. It can be used # to force the installation to use an alternative hostname rather than using the # first hostname found on the system. (e.g., for systems with multiple hostnames # and network interfaces) #------------------------------------------------------------------------------- ORACLE_HOSTNAME= #------------------------------------------------------------------------------- # Specify the Unix group to be set for the inventory directory. #------------------------------------------------------------------------------- UNIX_GROUP_NAME=oinstall #------------------------------------------------------------------------------- # Specify the location which holds the inventory files. # This is an optional parameter if installing on # Windows based Operating System. #------------------------------------------------------------------------------- INVENTORY_LOCATION=/u01/oracle/oraInventory #------------------------------------------------------------------------------- # Specify the languages in which the components will be installed. # # en : English ja : Japanese # fr : French ko : Korean # ar : Arabic es : Latin American Spanish # bn : Bengali lv : Latvian # pt_BR: Brazilian Portuguese lt : Lithuanian # bg : Bulgarian ms : Malay # fr_CA: Canadian French es_MX: Mexican Spanish # ca : Catalan no : Norwegian # hr : Croatian pl : Polish # cs : Czech pt : Portuguese # da : Danish ro : Romanian # nl : Dutch ru : Russian # ar_EG: Egyptian zh_CN: Simplified Chinese # en_GB: English (Great Britain) sk : Slovak # et : Estonian sl : Slovenian # fi : Finnish es_ES: Spanish # de : German sv : Swedish # el : Greek th : Thai # iw : Hebrew zh_TW: Traditional Chinese # hu : Hungarian tr : Turkish # is : Icelandic uk : Ukrainian # in : Indonesian vi : Vietnamese # it : Italian # # all_langs : All languages # # Specify value as the following to select any of the languages. # Example : SELECTED_LANGUAGES=en,fr,ja # # Specify value as the following to select all the languages. # Example : SELECTED_LANGUAGES=all_langs #------------------------------------------------------------------------------- SELECTED_LANGUAGES=en,zh_CN,zh_TW #------------------------------------------------------------------------------- # Specify the complete path of the Oracle Home. #------------------------------------------------------------------------------- ORACLE_HOME=/u01/oracle/product/db11gr2 #------------------------------------------------------------------------------- # Specify the complete path of the Oracle Base. #------------------------------------------------------------------------------- ORACLE_BASE=/u01/oracle #------------------------------------------------------------------------------- # Specify the installation edition of the component. # # The value should contain only one of these choices. # - EE : Enterprise Edition # - SE : Standard Edition # - SEONE : Standard Edition One # - PE : Personal Edition (WINDOWS ONLY) #------------------------------------------------------------------------------- oracle.install.db.InstallEdition=EE #------------------------------------------------------------------------------- # This variable is used to enable or disable custom install and is considered # only if InstallEdition is EE. # # - true : Components mentioned as part of 'optionalComponents' property # are considered for install. # - false : Value for 'optionalComponents' is not considered. #------------------------------------------------------------------------------- oracle.install.db.EEOptionsSelection=false #------------------------------------------------------------------------------- # This property is considered only if 'EEOptionsSelection' is set to true # # Description: List of Enterprise Edition Options you would like to enable. # # The following choices are available. You may specify any # combination of these choices. The components you choose should # be specified in the form "internal-component-name:version" # Below is a list of components you may specify to enable. # # oracle.oraolap:11.2.0.4.0 - Oracle OLAP # oracle.rdbms.dm:11.2.0.4.0 - Oracle Data Mining RDBMS Files # oracle.rdbms.dv:11.2.0.4.0- Oracle Database Vault option # oracle.rdbms.lbac:11.2.0.4.0 - Oracle Label Security # oracle.rdbms.partitioning:11.2.0.4.0 - Oracle Partitioning # oracle.rdbms.rat:11.2.0.4.0 - Oracle Real Application Testing #------------------------------------------------------------------------------- oracle.install.db.optionalComponents= ############################################################################### # # # PRIVILEGED OPERATING SYSTEM GROUPS # # ------------------------------------------ # # Provide values for the OS groups to which OSDBA and OSOPER privileges # # needs to be granted. If the install is being performed as a member of the # # group "dba", then that will be used unless specified otherwise below. # # # # The value to be specified for OSDBA and OSOPER group is only for UNIX based # # Operating System. # # # ############################################################################### #------------------------------------------------------------------------------ # The DBA_GROUP is the OS group which is to be granted OSDBA privileges. #------------------------------------------------------------------------------- oracle.install.db.DBA_GROUP=dba #------------------------------------------------------------------------------ # The OPER_GROUP is the OS group which is to be granted OSOPER privileges. # The value to be specified for OSOPER group is optional. #------------------------------------------------------------------------------ oracle.install.db.OPER_GROUP=oper #------------------------------------------------------------------------------- # Specify the cluster node names selected during the installation. # Example : oracle.install.db.CLUSTER_NODES=node1,node2 #------------------------------------------------------------------------------- oracle.install.db.CLUSTER_NODES= #------------------------------------------------------------------------------ # This variable is used to enable or disable RAC One Node install. # # - true : Value of RAC One Node service name is used. # - false : Value of RAC One Node service name is not used. # # If left blank, it will be assumed to be false. #------------------------------------------------------------------------------ oracle.install.db.isRACOneInstall=false #------------------------------------------------------------------------------ # Specify the name for RAC One Node Service. #------------------------------------------------------------------------------ oracle.install.db.racOneServiceName= #------------------------------------------------------------------------------- # Specify the type of database to create. # It can be one of the following: # - GENERAL_PURPOSE/TRANSACTION_PROCESSING # - DATA_WAREHOUSE #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.type=GENERAL_PURPOSE #------------------------------------------------------------------------------- # Specify the Starter Database Global Database Name. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.globalDBName= #------------------------------------------------------------------------------- # Specify the Starter Database SID. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.SID= #------------------------------------------------------------------------------- # Specify the Starter Database character set. # # One of the following # AL32UTF8, WE8ISO8859P15, WE8MSWIN1252, EE8ISO8859P2, # EE8MSWIN1250, NE8ISO8859P10, NEE8ISO8859P4, BLT8MSWIN1257, # BLT8ISO8859P13, CL8ISO8859P5, CL8MSWIN1251, AR8ISO8859P6, # AR8MSWIN1256, EL8ISO8859P7, EL8MSWIN1253, IW8ISO8859P8, # IW8MSWIN1255, JA16EUC, JA16EUCTILDE, JA16SJIS, JA16SJISTILDE, # KO16MSWIN949, ZHS16GBK, TH8TISASCII, ZHT32EUC, ZHT16MSWIN950, # ZHT16HKSCS, WE8ISO8859P9, TR8MSWIN1254, VN8MSWIN1258 #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.characterSet= #------------------------------------------------------------------------------ # This variable should be set to true if Automatic Memory Management # in Database is desired. # If Automatic Memory Management is not desired, and memory allocation # is to be done manually, then set it to false. #------------------------------------------------------------------------------ oracle.install.db.config.starterdb.memoryOption=false #------------------------------------------------------------------------------- # Specify the total memory allocation for the database. Value(in MB) should be # at least 256 MB, and should not exceed the total physical memory available # on the system. # Example: oracle.install.db.config.starterdb.memoryLimit=512 #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.memoryLimit= #------------------------------------------------------------------------------- # This variable controls whether to load Example Schemas onto # the starter database or not. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.installExampleSchemas=false #------------------------------------------------------------------------------- # This variable includes enabling audit settings, configuring password profiles # and revoking some grants to public. These settings are provided by default. # These settings may also be disabled. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.enableSecuritySettings=true ############################################################################### # # # Passwords can be supplied for the following four schemas in the # # starter database: # # SYS # # SYSTEM # # SYSMAN (used by Enterprise Manager) # # DBSNMP (used by Enterprise Manager) # # # # Same password can be used for all accounts (not recommended) # # or different passwords for each account can be provided (recommended) # # # ############################################################################### #------------------------------------------------------------------------------ # This variable holds the password that is to be used for all schemas in the # starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.ALL= #------------------------------------------------------------------------------- # Specify the SYS password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYS= #------------------------------------------------------------------------------- # Specify the SYSTEM password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYSTEM= #------------------------------------------------------------------------------- # Specify the SYSMAN password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.SYSMAN= #------------------------------------------------------------------------------- # Specify the DBSNMP password for the starter database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.password.DBSNMP= #------------------------------------------------------------------------------- # Specify the management option to be selected for the starter database. # It can be one of the following: # - GRID_CONTROL # - DB_CONTROL #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.control=DB_CONTROL #------------------------------------------------------------------------------- # Specify the Management Service to use if Grid Control is selected to manage # the database. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.gridcontrol.gridControlServiceURL= ############################################################################### # # # SPECIFY BACKUP AND RECOVERY OPTIONS # # ------------------------------------ # # Out-of-box backup and recovery options for the database can be mentioned # # using the entries below. # # # ############################################################################### #------------------------------------------------------------------------------ # This variable is to be set to false if automated backup is not required. Else # this can be set to true. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.automatedBackup.enable=false #------------------------------------------------------------------------------ # Regardless of the type of storage that is chosen for backup and recovery, if # automated backups are enabled, a job will be scheduled to run daily to backup # the database. This job will run as the operating system user that is # specified in this variable. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.automatedBackup.osuid= #------------------------------------------------------------------------------- # Regardless of the type of storage that is chosen for backup and recovery, if # automated backups are enabled, a job will be scheduled to run daily to backup # the database. This job will run as the operating system user specified by the # above entry. The following entry stores the password for the above operating # system user. #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.automatedBackup.ospwd= #------------------------------------------------------------------------------- # Specify the type of storage to use for the database. # It can be one of the following: # - FILE_SYSTEM_STORAGE # - ASM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.storageType= #------------------------------------------------------------------------------- # Specify the database file location which is a directory for datafiles, control # files, redo logs. # # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.fileSystemStorage.dataLocation= #------------------------------------------------------------------------------- # Specify the backup and recovery location. # # Applicable only when oracle.install.db.config.starterdb.storage=FILE_SYSTEM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.starterdb.fileSystemStorage.recoveryLocation= #------------------------------------------------------------------------------- # Specify the existing ASM disk groups to be used for storage. # # Applicable only when oracle.install.db.config.starterdb.storageType=ASM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.asm.diskGroup= #------------------------------------------------------------------------------- # Specify the password for ASMSNMP user of the ASM instance. # # Applicable only when oracle.install.db.config.starterdb.storage=ASM_STORAGE #------------------------------------------------------------------------------- oracle.install.db.config.asm.ASMSNMPPassword= #------------------------------------------------------------------------------ # Specify the My Oracle Support Account Username. # # Example : MYORACLESUPPORT_USERNAME=abc@oracle.com #------------------------------------------------------------------------------ MYORACLESUPPORT_USERNAME= #------------------------------------------------------------------------------ # Specify the My Oracle Support Account Username password. # # Example : MYORACLESUPPORT_PASSWORD=password #------------------------------------------------------------------------------ MYORACLESUPPORT_PASSWORD= #------------------------------------------------------------------------------ # Specify whether to enable the user to set the password for # My Oracle Support credentials. The value can be either true or false. # If left blank it will be assumed to be false. # # Example : SECURITY_UPDATES_VIA_MYORACLESUPPORT=true #------------------------------------------------------------------------------ SECURITY_UPDATES_VIA_MYORACLESUPPORT=false #------------------------------------------------------------------------------ # Specify whether user doesn't want to configure Security Updates. # The value for this variable should be true if you don't want to configure # Security Updates, false otherwise. # # The value can be either true or false. If left blank it will be assumed # to be false. # # Example : DECLINE_SECURITY_UPDATES=false #------------------------------------------------------------------------------ DECLINE_SECURITY_UPDATES=true #------------------------------------------------------------------------------ # Specify the Proxy server name. Length should be greater than zero. # # Example : PROXY_HOST=proxy.domain.com #------------------------------------------------------------------------------ PROXY_HOST= #------------------------------------------------------------------------------ # Specify the proxy port number. Should be Numeric and at least 2 chars. # # Example : PROXY_PORT=25 #------------------------------------------------------------------------------ PROXY_PORT= #------------------------------------------------------------------------------ # Specify the proxy user name. Leave PROXY_USER and PROXY_PWD # blank if your proxy server requires no authentication. # # Example : PROXY_USER=username #------------------------------------------------------------------------------ PROXY_USER= #------------------------------------------------------------------------------ # Specify the proxy password. Leave PROXY_USER and PROXY_PWD # blank if your proxy server requires no authentication. # # Example : PROXY_PWD=password #------------------------------------------------------------------------------ PROXY_PWD= #------------------------------------------------------------------------------ # Specify the proxy realm. # # Example : PROXY_REALM=metalink #------------------------------------------------------------------------------ PROXY_REALM= #------------------------------------------------------------------------------ # Specify the Oracle Support Hub URL. # # Example : COLLECTOR_SUPPORTHUB_URL=https://orasupporthub.company.com:8080/ #------------------------------------------------------------------------------ COLLECTOR_SUPPORTHUB_URL= #------------------------------------------------------------------------------ # Specify the auto-updates option. It can be one of the following: # - MYORACLESUPPORT_DOWNLOAD # - OFFLINE_UPDATES # - SKIP_UPDATES #------------------------------------------------------------------------------ oracle.installer.autoupdates.option=SKIP_UPDATES #------------------------------------------------------------------------------ # In case MYORACLESUPPORT_DOWNLOAD option is chosen, specify the location where # the updates are to be downloaded. # In case OFFLINE_UPDATES option is chosen, specify the location where the updates # are present. #------------------------------------------------------------------------------ oracle.installer.autoupdates.downloadUpdatesLoc= #------------------------------------------------------------------------------ # Specify the My Oracle Support Account Username which has the patches download privileges # to be used for software updates. # Example : AUTOUPDATES_MYORACLESUPPORT_USERNAME=abc@oracle.com #------------------------------------------------------------------------------ AUTOUPDATES_MYORACLESUPPORT_USERNAME= #------------------------------------------------------------------------------ # Specify the My Oracle Support Account Username password which has the patches download privileges # to be used for software updates. # # Example : AUTOUPDATES_MYORACLESUPPORT_PASSWORD=password #------------------------------------------------------------------------------ AUTOUPDATES_MYORACLESUPPORT_PASSWORD= 静默安装oracle软件 ./runInstaller -silent -responseFile /u01/oracle/software/database/db_install_11g.rsp